Raymarine forum / Raymarine Forums / Multifunction Displays v / is it necessary to connect transducer to master MFD?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
is it necessary to connect transducer to master MFD?
10-19-17, 12:21 AM
Post: #1
jonsnoddy Offline
Junior Member
**
 		Posts: 2
Joined: Sep 2017
Reputation: 0
is it necessary to connect transducer to master MFD?
I have two ES series MFD's Is it necessary to connect the depth transducer to the master or can it connect to either? The two MFD's are connected by Ethernet.
Find all posts by this user
Quote this message in a reply
10-24-17, 03:58 PM (This post was last modified: 10-24-17 03:58 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: is it necessary to connect transducer to master MFD?
Welcome to the Raymarine Forum Jon,

The fishfinder transducer may be interfaced to the Transducer socket of either MFD (assumes that both MFDs have been equipped with the same type of fishfinder processing circuitry (ex. DownVision or 600W 50kHz/200kHz).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication