Threaded Mode | Linear Mode

slyluna

We added an Axiom pro and a rv100 transducer. We kept a 1KW airmar transducer that was connected to a cp 370, We removed the cp 370 because it was no longer needed. Now I don't get a water temperature reading. It's on the screen but does not give me a temperature. Please advise.

***Chuck - Raymarine - Moderator*** · 05-03-18, 03:12 PM

Welcome to the Raymarine Forum slyluna,

What version of LightHouse 3 software is installed within your MFD?

slyluna

I have 3.4.66. If I unplug the 1 KW airman b260 then i'm getting temperature from the rv100. Maybe the temp isn't working on the b260. There doesn't appear to be a way to switch over to the rv100. If it is my b260, can I add your ST 69 speed/temp transducer and network it into the system? It seems that the MFD wants to default to the stronger transducer. Thank you for your response

***Chuck - Raymarine - Moderator*** · 05-04-18, 10:32 AM

slyluna,

Please click here to view a FAQ addressing Temperature source prioritization within a system of MFDs running LightHouse 3 software ... particularly the last paragraph of this FAQ.