European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA11] Fasteners for i70S and p70S displays
|
|
05-22-18, 09:21 AM
(This post was last modified: 05-22-18 01:28 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] Fasteners for i70S and p70S displays
My displays each came with 4 self-threading screws that I assumed were for mounting the display, since there were no other fasteners in the package. These screws are too small to engage in the holes in the back of the displays. What should I use? Did I miss something?
Thanks. Mark |
|||
|
|
05-22-18, 02:10 PM
(This post was last modified: 05-22-18 02:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: [CA11] Fasteners for i70S and p70S displays
Welcome to the Raymarine Forum Mark,
Please see the diagram below from the i70S Installation and Operations Guide. As you can see from this diagram, the screws are not intended to be driven from the front side of the i70s, through the i70S, and then into the mounting surface ... not the other way around. |
|||
|
|
|
05-28-18, 06:45 AM
(This post was last modified: 05-28-18 01:48 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
|
RE: [CA11] Fasteners for i70S and p70S displays
Thanks, Chuck.
Mark |
|||
|
|
|
05-28-18, 01:49 PM
Post: #4
|
|||
|
|||
|
RE: [CA11] Fasteners for i70S and p70S displays
You're welcome.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)