Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom with a quantum raydome~ do I need a heading sensor?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom with a quantum raydome~ do I need a heading sensor?
07-29-18, 08:47 PM (This post was last modified: 07-30-18 02:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
Wstandis Offline
Junior Member
**
 		Posts: 15
Joined: Jul 2017
Reputation: 0
[CA11] Axiom with a quantum raydome~ do I need a heading sensor?
Thanks?
Find all posts by this user
Quote this message in a reply
07-30-18, 02:22 PM (This post was last modified: 07-30-18 02:22 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom with a quantum raydome~ do I need a heading sensor?
Welcome to the Raymarine Forum Wstandis,

With regard to features which require heading, a Quantum no different from that of Digital/HD Digital Radome or HD/SuperHD Open Array Radar. Please click here to view a FAQ addressing heading dependent radar features. In short radar overlay of the Chart application is supported with COG alone. However, the vessel must be underway and making way (the only time that COG is available / valid) in order to enable radar overlay of the Chart application.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication