Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] C120 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C120 MFD
08-11-18, 09:04 AM (This post was last modified: 08-16-18 12:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
MarinerGuy Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2018
Reputation: 0
[CA11] C120 MFD
Is my (old) C120 Classic MFD able/capable of displaying engine data
(specifically fuel consumption) when connected to an N2K back bone?
Find all posts by this user
Quote this message in a reply
08-16-18, 12:26 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] C120 MFD
Welcome to the Raymarine Forum MarinerGuy,

In short, yes. Please click here to view a FAQ addressing this subject. Please note that it is recommended that the C-Series Classic MFD be updated with v5.16 software is you have not done so already to maximize performance of this and other features of the MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication