[CA] [CA11] Axiom Pro chart page scale factor changing when switching pages

[george123]

I have a problem with the scale factor not staying set when switching pages. When I have the chart page set to 25 feet and I switch to a weather page and that page has the scale set to 25 miles and now I go back to the chart page the scale changes to some other value 2500 feet.
I assumed that when you leave a page i.e. the chart page the scale factor would not be changed so when you go back it would be the same and not changed.


I have a movie that shows what is happening. size 176.4 MB
How can I get this movie to someone to review.

Thanks
George

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum George,

This problem has been duplicated and logged logged as a problem to be corrected within a future LightHouse 3 software update.

[george123]

Is there any update on this issue with the scale changing when switching pages?

[Chuck - Raymarine - Moderator]

George,

This issue has most definitely gained traction. While no promises can be made, it would not surprise me if this issue is addressed within the next LightHouse 3 software update.

[george123]

Thanks Chuck

[Chuck - Raymarine - Moderator]

You're welcome.