Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Autohelm depth,speed replacement

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Autohelm depth,speed replacement
10-10-18, 10:05 AM (This post was last modified: 10-10-18 03:39 PM by Chuck - Raymarine - Moderator.)
Post: #1
sailcm44 Offline
Junior Member
**
 		Posts: 2
Joined: Oct 2017
Reputation: 0
[CA11] Autohelm depth,speed replacement
I have an old autohelm tridata which I assume is the same as the raymarine i40 and I need to upgrade. Will the new transducers in the i50, i60 be the same size as the old tridata? I have no info on the old units but they are separate speed and depth and removable with plugs and a flapper (?) to restrict water inflow. I also have a repeater that's not really neccesary. Not anywhere near the boat to measure.

Pj
Find all posts by this user
Quote this message in a reply
10-10-18, 03:43 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Autohelm depth,speed replacement
Welcome to the Raymarine Forum Pj,

Depth and speed/temp transducers which were designed for any of the following are compatible with an i50 Tridata Instrument:
- ST50 Tridata
- ST50+ Tridata
- ST60 Tridata
- ST60+ Tridata
- ST40 Bidata
- ST70/ST290 Depth and Speed/Temp pods.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication