Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] Continous Range and Bearing to Cursor, Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Continous Range and Bearing to Cursor, Axiom
05-31-19, 05:18 AM (This post was last modified: 06-03-19 04:42 PM by Chuck - Raymarine - Moderator.)
Post: #1
carlmk Offline
Junior Member
**
 		Posts: 42
Joined: Oct 2017
Reputation: 0
[CA11] Continous Range and Bearing to Cursor, Axiom
In an Axiom Pro or Axiom 9, Is there a mode where the range and bearing is continuously displayed on the chart as the cursor is moved around away from the boat?

My old E120 has this feature and it was very useful in navigating and planning. Cannot find it on my Axioms.
Find all posts by this user
Quote this message in a reply
06-03-19, 04:45 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Continous Range and Bearing to Cursor, Axiom
Welcome back to the Raymarine Forum Carl,

The feature which you have inquired about was referred to as the Cursor Range and Bearing data item within MFDs running LightHouse II software. This feature has not yet been included within a LightHouse 3 software update, but has been logged accordingly for consideration to be included within an updated.

Please click here more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication