European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA] [CA11] ST 69
|
|
06-07-19, 06:38 AM
(This post was last modified: 06-07-19 08:42 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] ST 69
I have a ST 69 speed and Temp that I would like to integrate into my new setup that I am working on. I have a ES127 installed and will be adding a HS5 network switch, CP470 and a M265 transducer which will replace the existing M260. How do I do this?
|
|||
|
|
06-07-19, 08:51 AM
Post: #2
|
|||
|
|||
|
RE: [CA11] ST 69
Welcome to the Raymarine Forum RKW68,
Was the ST69 previously connected to a Y-Cable which had been interfaced to the M260 transducer and to the DSM300? If so, then this Y-Cable would need to be replaced with the A80345 Y-Cable which would be connected to the ST69, the M265, and the CP470. |
|||
|
|
|
06-07-19, 12:36 PM
(This post was last modified: 06-07-19 01:04 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
|
RE: [CA11] ST 69
I recently removed the RL80C and the DSM250, I don't remember a Y cable being attached. How is the A80345-Y cable connected between the various pieces ?
|
|||
|
|
|
06-07-19, 01:07 PM
Post: #4
|
|||
|
|||
|
RE: [CA11] ST 69
The A80345 Y-Cable features a plug which is designed to be mated to the CP470's socket, a socket which is designed to be mated to 1kW CHIRP transducers, and a socket which is designed to be plugged into speed/temp transducers which had been designed for use with a DSM250, DSM30, DSM300, CP300, or CP370.
|
|||
|
|
|
06-07-19, 01:22 PM
(This post was last modified: 06-07-19 01:38 PM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
|
RE: [CA11] ST 69
Thank you...
|
|||
|
|
|
06-07-19, 01:38 PM
Post: #6
|
|||
|
|||
|
RE: [CA11] ST 69
You're welcome.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)