[TG] [TG11] EVO with an S100/SmartController
|
08-12-19, 01:58 PM
(This post was last modified: 08-19-19 02:08 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[TG11] EVO with an S100/SmartController
In the manual for the Ev-1 it lists the S100 and SmartController as compatible but has the note "repeat controller only" after them. What does repeat controller only mean? What functionality will either controller have on a modern Evo autopilot?
Thanks. |
|||
08-16-19, 01:01 AM
(This post was last modified: 08-16-19 01:15 AM by Tom - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: EVO with an S100/SmartController
Hello Niiiad,
It means that they can't be the sole pilot controller, there must be an p70/p70R or Axiom-class MFD in the system as well, but that's all. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
08-16-19, 08:56 PM
(This post was last modified: 08-19-19 02:09 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [TG11] EVO with an S100/SmartController
Would an ES98 MFD work or does it have to be an Axiom?
|
|||
08-20-19, 02:15 AM
Post: #4
|
|||
|
|||
RE: [TG11] EVO with an S100/SmartController
Sorry, quite right: you can control a recent Raymarine pilot using a display running Lighthouse 2 or Lighthouse 3, including eS MFDs, without a dedicated fixed-mount pilot controller (so just an eS and Smartcontroller will be ok.) I personally always recommend a dedicated pilot display, but it's not required with those MFDs.
Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)