Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Autopilot / control head compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Autopilot / control head compatibility
08-29-19, 09:28 PM (This post was last modified: 08-30-19 08:59 AM by Chuck - Raymarine - Moderator.)
Post: #1
Frederik13 Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2019
Reputation: 0
[CA11] Autopilot / control head compatibility
Our catamaran has a 400 course computer, with ST6001+ and ST600R control heads and a Smart Controller.
The rest is ST60+ series, plus a multiplexer and PC for navigation
The autopilot could break down during an ocean passage. I have the opportunity to buy a spare S3G AST course computer.
On the Internet I could not find information regarding compatibility between ST6001+ and S3G AST. Even better would be a compatibility table. Could anybody inform me?
Thanks
Find all posts by this user
Quote this message in a reply
08-30-19, 09:07 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Autopilot / control head compatibility
Welcome to the Raymarine Forum Frederik,

The S1/S1G/S2/S2G/S3/S3G autopilot course computers were designed for use with the ST6xxx/ST7xxx/ST8XXX autopilot control heads (ex. ST6000, ST6001+, ST6002+, ST7000, etc.). All autopilot control heads introduced since, including the currently offered p70S and p70RS autopilot control heads.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication