Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] RD418D Cable - RayNet to e125/127

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RD418D Cable - RayNet to e125/127
09-27-19, 09:33 AM (This post was last modified: 09-27-19 02:20 PM by Chuck - Raymarine - Moderator.)
Post: #1
SeekRest Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2019
Reputation: 0
[CA11] RD418D Cable - RayNet to e125/127
I have a RD418d without a cable.
My MFDs are (2) e127’s connected via direct RayNet, with my data master connected My primary network is NMEA2k/SeaTalkng.
I do not have SeaTalkhs on the boat.

Can I utilize the A80229 cable direct to the open RayNet on my data master e127?
Find all posts by this user
Quote this message in a reply
09-27-19, 02:20 PM (This post was last modified: 09-27-19 02:20 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] RD418D Cable - RayNet to e125/127
Welcome to the Raymarine Forum SeekRest,

Q. Can I utilize the A80229 cable direct to the open RayNet on my data master e127?
A. Yes. The Digital Radar Cable which you have referenced may be interfaced to any of the currently unoccupied Ethernet Network (RayNet) sockets within any of the MFDs within the system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication