Raymarine forum / Raymarine Forums / Multifunction Displays v / [JB] [JB] Element 9S COG vector

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB] [JB] Element 9S COG vector
05-17-20, 08:18 PM (This post was last modified: 05-20-20 02:08 AM by Jules - Raymarine - Moderator.)
Post: #1
HighCs Offline
Junior Member
**
 		Posts: 2
Joined: Sep 2017
Reputation: 0
[JB] Element 9S COG vector
I recently upgraded from the A60 to the Element and no longer have a vector showing COG. I appreciated having range rings and vector lengths available to me. Is this not available with the element?
Find all posts by this user
Quote this message in a reply
05-20-20, 02:32 AM
Post: #2
Jules - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 98
Joined: Oct 2019
Reputation: 0
RE: [JB] Element 9S COG vector
Hello HighCs,

Welcome to the Raymarine forum,

On the chart page of your Element 9S you can enable the COG vector by moving the cursor over your vessel icon, which will turn red, and press OK. Use up/down arrows to move to COG on the menu and press OK. You can also change the length of the vector line by changing the Reference period.

Happy boating and kind regards
Jules
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication