CP200 with CP100 and DSM300

[dhill67]

I am considering adding a CP200 side vision sonar and transducer to my current setup. I have an A98 with built-in down-vision and CPT100 transducer mount on the starboard transom. I also have a DSM300 with thru-hull sonar transducer. If I add the CP200 would I have any issues mounting the CPT200 transducer near the CPT100? What is the optimum mounting configuration? Also, will I need any additional cables to connect to the A98? I have an HD418 color radar installed as well. What are the wiring requirements for the CP200 sonar module? Just power and the transducer cable?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum dhill67,

Please click here to view a FAQ addressing this subject.