Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Yanmar 4JHBE to ECI-100?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Yanmar 4JHBE to ECI-100?
02-25-19, 10:35 PM (This post was last modified: 02-26-19 08:36 AM by Chuck - Raymarine - Moderator.)
Post: #1
mattersfeld Offline
Junior Member
**
 		Posts: 3
Joined: Jul 2016
Reputation: 0
[CA11] Yanmar 4JHBE to ECI-100?
Im wondering if it is possible to hook up my Yanmar 4JHBE to a Seatalkng backbone via a ECI-100 so that I can read the engine data on my MFDs. If this is possible what is the harness device number that I need to purchase to connect to the ECI-100? The engine is from 1990ish..
Find all posts by this user
Quote this message in a reply
02-26-19, 08:49 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Yanmar 4JHBE to ECI-100?
Welcome to the Raymarine Forum mattersfeld,

Please click here to view the ECI-100 Engine Compatibility web page addressing which Yanmar engines are supported for use with the ECI-100. Unfortunately, Yanmar's 4JHBE is not among the engines listed. You may want to consider checking with third party NMEA 2000 engine gateway manufacturers to (ex. Maretron (J2K100 J1939 to NMEA 2000® gateway), Yacht Devices (YDEG-04), etc.).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication