European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA] [CA11] E120 Fuse Sizing
|
|
05-13-19, 01:22 PM
(This post was last modified: 05-13-19 02:48 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] E120 Fuse Sizing
I bought a used E120 system complete with manuals and am having a hard time determining the proper fuse sizing for the different components. I have an E120 with a RD216 attached to it, a DSM300 and a Seatalk high speed switch. Also, I can't find a manual for the DSM300 in your support section? Thanks - Terry
|
|||
|
|
05-13-19, 02:52 PM
(This post was last modified: 05-14-19 08:27 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: [CA11] E120 Fuse Sizing
Welcome to the Raymarine Forum Terry,
When interfaced to a 2kW radome, the E120's circuit should be protected with 15A fuse or 10A breaker. The DSM300's circuit should be protected with an 8A fuse or 10A breaker. The SeaTalkhs Network Switch's circuit should be protected with a 2A fuse. Please note that there are two pages of Retired Fishfinder Manuals and that the DSM30/300's Manual is located on the second page (2 of 2). |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)