[CA] [CA11] Spur cable extender
|
08-20-19, 12:19 PM
(This post was last modified: 08-26-19 03:43 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Spur cable extender
Can I use the backbone extender adapter to extend a spur cable. I need to connect my spur cable to my nmea backbone, I cannot find a cable with a female seatalk ng conntor to male mnea, does one exist?
|
|||
08-26-19, 03:53 PM
Post: #2
|
|||
|
|||
RE: [CA11] Spur cable extender
Welcome to the Raymarine Forum Gary,
Raymarine does not offer SeaTalkng Spur Cable Extenders which would support joining a pair of SeaTalkng Spur Cables. However, Raymarine offers the A06802 SeaTalkng (M) to DeviceNet (F) adapter which would permit a spur cable to be extended using third cable having DeviceNet plugs of the correct gender on each end. Please note that the maximum supported total length of a spur is 6m. Should the device be located more than 6m from a spur socket within the backbone, then the backbone must be extended in the direction of the device to be added. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)