Raymarine forum / Raymarine Forums / Autopilots v / Raymarine S1000 compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Raymarine S1000 compatibility
03-30-16, 04:05 PM
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2016
Reputation: 0
Raymarine S1000 compatibility
I just bought a 2005 boat with C80 MFD and a S1000 Auto-Pilot. I am think about replacing the old C80 MFD with a new A-series or E-series MFD. Are there any compatibility issues I need to be aware of?

Thanks!

Chuck
Find all posts by this user
Quote this message in a reply
03-31-16, 08:25 AM (This post was last modified: 03-31-16 08:25 AM by Steve - Raymarine - Moderator.)
Post: #2
Steve - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 318
Joined: Feb 2016
Reputation: 0
RE: Raymarine S1000 compatibility
No compatibility issues. Although the new displays do not have the Seatalk 1 interface any longer, they have the newer style Seatalk NG (NMEA 2000). The S1000 is a Seatalk 1 device so you will need to add a Seatalk to Seatalk NG converter. Connect the S1000 course computer via Seatalk to the yellow port on the converter and connect the converter to the Seatalk NG port on the a or e Series MFD using the Seatalk NG port.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication