Raymarine forum / Raymarine Forums / Multifunction Displays v / Connecting Raymarine Axiom 7 to Command Link

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting Raymarine Axiom 7 to Command Link
08-10-17, 11:22 AM
Post: #1
steaua1986 Offline
Junior Member
**
 		Posts: 5
Joined: Jul 2017
Reputation: 0
Connecting Raymarine Axiom 7 to Command Link
I have a 2014 Yamaha F300 OB with command link (and hub port available). Is there a way to connect the Axiom 7 directly to the hub, without building a NMEA network?
Thanks.
Find all posts by this user
Quote this message in a reply
08-17-17, 11:23 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Connecting Raymarine Axiom 7 to Command Link
Welcome to the Raymarine Forum steaua1986,

Raymarine does not support interfacing engines systems directly its products. Instead, Raymarine recommends that an engine gateway be used. In this case the ECI-100 would be applicable. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication