Raymarine forum / Raymarine Forums / Radar v / 12 KW scanner not recognized by MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
12 KW scanner not recognized by MFD
08-11-17, 11:19 AM
Post: #1
Pedro Chavez Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2017
Reputation: 0
12 KW scanner not recognized by MFD
we have a new 12 KW radar scanner E92160E S/N 0650012 which stops working, suddenly it was not recognized by any of the displays, we also have a 4Kw open array scanner on board. The cables from the scanner were swapped and nothing happens.

Both VCM100 indicates the ON ligth lit, also the Sealtalk HS router was checked and we tried other empty slots for the signal cable from the scanner

We still have the 12 KW radar not recognized, the 4 KW radar is working
Wath would you recommend to check out?
Find all posts by this user
Quote this message in a reply
08-22-17, 03:11 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: 12 KW scanner not recognized by MFD
Welcome to the Raymarine Forum Pedro,

What model of MFD is installed onboard the subject vessel?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication