Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] updating axiom to 3.2.101
12-11-17, 09:41 AM (This post was last modified: 12-11-17 04:48 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] updating axiom to 3.2.101
Im trying to update software to newest version 3.2.101. unit will recognize that version 3.2.101 is on the sd card. when i select update unit now, it says software update failed. current version is 3.1.605. Ive tried different sd cards, ive re-downloaded the file. im still getting the same result.
Find all posts by this user
Quote this message in a reply
12-11-17, 04:48 PM
Post: #2
RE: [CA] updating axiom to 3.2.101
Welcome to the Raymarine Forum dustinzstingray,

It is recommended that a Factory Reset (HOME-SETTINGS->THIS DISPLAY->FACTORY RESET) be commanded at that you then try the update again using a microSD memory card having a capacity which is no greater than 32GB and has been formatted with a FAT32 file system ... some microSD memory cards are being formatted from the factory with a file system which is not FAT32. Should you have addressed the items recommended above and should the problem persist then please respond accordingly.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)