Raymarine forum / Raymarine Forums / Fishfinders v / [CA] 3D Thru-Hull Split Pair Transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] 3D Thru-Hull Split Pair Transducer
02-19-18, 06:14 PM (This post was last modified: 02-20-18 04:18 PM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 2
Joined: Oct 2017
Reputation: 0
[CA] 3D Thru-Hull Split Pair Transducer
When installing Rv-220P and RV-220S transducers on a hull that has 18 degree deadrise angle, is it necessary to mount them with wedges or blocks, or are they designed to accommodate the angles ?
Find all posts by this user
Quote this message in a reply
02-20-18, 04:26 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] 3D Thru-Hull Split Pair Transducer
Welcome to the Raymarine Forum Larry,

The RV-220P and RV-220S transducers are designed to be installed directly against the hull (i.e. no fairing blocks / wedges). These transducers feature angled elements to compensate for hull deadrise.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication