Raymarine forum / Raymarine Forums / Radar v / (DG) Quantum 2 cable length shortening

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Quantum 2 cable length shortening
04-19-18, 01:06 PM (This post was last modified: 04-20-18 09:15 AM by Derek - Raymarine - Moderator.)
Post: #1
rkliever Offline
Junior Member
**
 		Posts: 7
Joined: Apr 2018
Reputation: 0
(DG) Quantum 2 cable length shortening
I've ordered a Quantum 2 radar and would like to know if it is ok to cut the radar cable and install connectors on it at the base of my mast. Does Raymarine have the connectors?
Find all posts by this user
Quote this message in a reply
04-20-18, 09:50 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: (DG) Quantum 2 cable length shortening
Hi rkliever

Thank you for your enquiry below.

Whilst it is always best to avoid joins in the cable - every join introduces a potential failure point, as long as they are made carefully and correctly, it should not be a problem. Please refer here for more information.

Raymarine do not supply such connectors, and would recommend the connection be made below decks or in a protected area.

regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication