European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
e120 classic
|
|
05-04-16, 01:28 PM
Post: #1
|
|||
|
|||
|
e120 classic
what would I need to connect a airmar gh2183 gps and heading sensor to my e120. the only other feed would be the radar. thanks , Jim
|
|||
|
|
05-04-16, 01:57 PM
Post: #2
|
|||
|
|||
|
RE: e120 classic
Welcome to the Raymarine Forum Jim,
It is recommended that the MFD and GH2183 each be interfaced as a spur to a powered and properly terminated SeaTalkng backbone. A simple backbone may be constructed from the following components: - A06064 SeaTalkng 5-Way Connector - A06031 SeaTalkng Termination Plugs x 2 ... one each to be installed within the blue backbone sockets of the SeaTalkng 5-Way Connector - A06049 SeaTalkng Power Cable ... connects to switched 12VDC power circuit and to white spur socket of SeaTalkng 5-Way Connector - A06061 / 4.92in (1.5m) SeaTalkng to E-Series Classic MFD Adapter ... connects between MFD's SeaTalk2/NMEA 2000 (SeaTalkng) socket and white spur socket of SeaTalkng 5-Way Connector - A06075 / 39.4in (1.0m) DeviceNet Female to SeaTalkng Spur ... connects between GH2183's cable and white spur socket of SeaTalkng 5-Way Connector |
|||
|
|
|
05-05-16, 07:48 AM
Post: #3
|
|||
|
|||
|
RE: e120 classic
Chuck , thanks for the info. Parts are on order. If I have a problem i'll let you know . Thanks , Jim
|
|||
|
|
|
05-05-16, 09:55 AM
Post: #4
|
|||
|
|||
|
RE: e120 classic
You're welcome.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 3 Guest(s)