Raymarine forum / Raymarine Forums / Multifunction Displays v / Dual E80 Classics displaying engine data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dual E80 Classics displaying engine data
05-06-16, 09:45 AM
Post: #1
unixdood Offline
Member
***
 		Posts: 87
Joined: Mar 2016
Reputation: 0
Dual E80 Classics displaying engine data
I have 2 E80 Classics connected to the Raymarine switch. I have a a working engine monitor connected to one of the E80's. Can I display this data on either MFD's or will it only display on the MFD that has the physical connection to the canbus?
Find all posts by this user
Quote this message in a reply
05-06-16, 10:25 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Dual E80 Classics displaying engine data
Welcome to the Raymarine Forum unixdood,

Yes. Engine data received by the Data Master MFD will be shared with other E-Series Classic MFDs which have been interfaced via an Ethernet (SeaTalkhs/RayNet) network.
Find all posts by this user
Quote this message in a reply
05-09-16, 08:50 PM (This post was last modified: 05-10-16 11:41 AM by Chuck - Raymarine - Moderator.)
Post: #3
unixdood Offline
Member
***
 		Posts: 87
Joined: Mar 2016
Reputation: 0
RE: Dual E80 Classics displaying engine data
Thank you for the rapid reply!
Find all posts by this user
Quote this message in a reply
05-10-16, 11:41 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Dual E80 Classics displaying engine data
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication