[DG] [DG11] ST4000 (black) MK1 wired remote pinout

[thedoublee]

I have come across a wired remote for my old Raymarine Autohelm ST4000 (black control head) that is missing the mating plug that was meant to be installed in the console. I need to know what the pinouts are for the remote cable in order to connect it to the control head. Thanks!

[Derek - Raymarine - Moderator]

Hi thedoublee

Thankyou for your enquiry.

Please can you send pictures of the remote? There were two black versions, one was SeaTalk with 3 pins and one had 4 pins and preceded SeaTalk and so cannot be connected to the ST4000 display.

Picture of the SeaTalk compatible remote

Thanks
Derek

[thedoublee]

Thanks for the reply, and I think that answers my question about the remote. Apparently I have the 3-pin Seatalk version, I made a guess at the Seatalk connections based on the colors of the wires and hooked it up to the control head and the control head is responding. I am assuming gray=ground, red=red and yellow=yellow.

I have a question about the difference between the ST4000+ and ST5000+, specifically can the st5000+ be used with a wheel pilot.

Let me know if I need to start a new thread for this question, thanks!

Evan

[Louise - Raymarine - Moderator]

Dear thedoublee,

Thank you for your query.

The ST5000+ is capable of driving the wheel pilot, please be aware that we no longer have any spares for this product.

Many Thanks
Louise