Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom software update.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom software update.
04-19-19, 07:46 AM (This post was last modified: 04-23-19 09:46 AM by Chuck - Raymarine - Moderator.)
Post: #1
dustinzstingray Offline
Junior Member
**
 		Posts: 21
Joined: Dec 2017
Reputation: 0
[CA11] Axiom software update.
I have recently been told that to finish a axiom software update, it is necessary to to a factory reset on the unit. Is this true?? Ive done more than i can count and have never done any factory resets before. Thank you
Find all posts by this user
Quote this message in a reply
04-23-19, 09:50 AM (This post was last modified: 04-23-19 09:51 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom software update.
Welcome to the Raymarine Forum Dustin,

It is generally not necessary to perform a Factory Reset to the MFD running LightHouse 3 or LightHouse II software unless odd behaviors are experienced following the software update. However, if a problem is encountered following a software update, then the likely first action which will be recommended by Product Support will be to perform a Factory Reset.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication