[CA] [CA11] 2nd transducer with the axiom 9

[Gnj5]

Hi Guys, I just recently installed s new axiom 9 on my seacraft. I m using the RV 100. Like others I’m not able to hold bottom over 8knts. What is everyone running for a secondary 50/200 transom mount transducer? Any suggestions would be greatly appreciated.

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Gnj5,

If seeking a transom mounted transducer would typically be recommended that either the A102138 P58 or E66054 P66 transducers be used for such purposes. For those having solid fiberglass hulls no thicker than 5/8" who may be seeking an in-hull transducer for such purposes, the E66073 P74 or the E66008 P79 transducers are often used for such purposes. If selecting the P58 or P74 transducer, then the A80491 Y-Cable would be used. Alternatively, if selecting the P66 or P79 transducer, hen the A80492 Y-Cable would be used.

[Gnj5]

Chuck, Thanks for the response. I think I’ll give the P66 a shot.

[Chuck - Raymarine - Moderator]

You're welcome.