[CA] [CA11] LH3.9 upgrade no sailing settings

[heysteve]

I just updated my Axiom Pro to LH3.9 (from 3.8) and do not see the new sailing settings under Settings->Boat Details. My boat type is Sail Cruiser. I tried setting to Powerboat then back to Sail Cruiser but no change.

Any suggestions?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Steve,

It is recommended that your system's waypoints, routes, and tracks be exported to a microSD memory card, that Factory Reset (HOME->SETTINGS->THIS DISPLAY->FACTORY RESET) be commanded to address this issue. Setting the boat type to one of the sailing boat types listed should then permit a Laylines tab to be displayed within the Chart application's settings (MENU->SETTINGS).

[heysteve]

This worked, thanks.

[Chuck - Raymarine - Moderator]

You're welcome.