[CA] [CA11] Axiom 9 interface to ST60 instruments

[Captain Kirk]

Hi Chuck

Do I need to upgrade the software in the 150G course computer and ST6001+. Are there any updates available for these legacy products?

Thanks

Kirk

[Chuck - Raymarine - Moderator]

Kirk,

Q. Do I need to upgrade the software in the 150G course computer and ST6001+. Are there any updates available for these legacy products?
A. Negative. No software updates are available for these products.

[Captain Kirk]

Hi again Chuck.... and thanks again for all your support. Questions:

1)Can the 150G/ST6001+ be controlled from the Axiom? I have everything connected and it seems to be communicating e.g) autopilot parameters are available on the sidebar. I wasn't able to activate the Pilot control and I don't have a Pilot icon showing so I'm wondering if I will only have control from ST6001+.

2)Will the pilot be able to follow a route automatically?

I haven't done any sea trials yet.

Kirk

[Chuck - Raymarine - Moderator]

Kirk,

Q1. Can the 150G/ST6001+ be controlled from the Axiom? I have everything connected and it seems to be communicating e.g) autopilot parameters are available on the sidebar. I wasn't able to activate the Pilot control and I don't have a Pilot icon showing so I'm wondering if I will only have control from ST6001+.
A1. Please click here to view a FAQ addressing this subject.

Q2. Will the pilot be able to follow a route automatically?
A2. This question is also addressed within the FAQ referenced in my response to Q1.

[Captain Kirk]

thanks very much Chuck!

[Chuck - Raymarine - Moderator]

You're welcome.