[CA] [CA11] Network Diagram - DUAL AXIOM MFDs

[msantella]

I would appreciate it if you could review the attached network diagram using the following equipment:

2 - Axiom 9 MFD with internal sonar
Raydome 418HD Radar
Ray 53 VHF Radio
Fusion RA 70 Marine radio
RV-100 - downvision Transducer
CP370 Sonar Module
B260 Transducer
HS5 Ethernet Switch
Seatalk

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum msantella,

Your network diagram is off to a good start. It appears to only be missing the following items:

- a spur (white) socket within the backbone, through which the backbone will be powered from a switched 12VDC power circuit. Please click here to view a FAQ addressing how additional spur sockets may be added to the backbone.

- SeaTalkng Termination Plugs within the backbone's two end sockets

[msantella]

Chuck, realized that my Fusion stereo is not network capable so I have the following drawing for review:

Thanks

[Chuck - Raymarine - Moderator]

Mark,

The only item which appears to be missing from the diagram is a power connection to the VHF radio. Otherwise, good job.