Raymarine forum / Raymarine Forums / Autopilots v / [TG] [TG11] S100 compatibility with ST4000+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] S100 compatibility with ST4000+
06-03-20, 11:00 PM (This post was last modified: 06-17-20 12:33 AM by Tom - Raymarine - Moderator.)
Post: #1
bucky Offline
Junior Member
**
 		Posts: 23
Joined: Mar 2018
Reputation: 0
[TG11] S100 compatibility with ST4000+
are a st4000plus and a s100 compatable?
thanks for input
bucky
Find all posts by this user
Quote this message in a reply
06-17-20, 12:34 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] S100 compatibility with ST4000+
Hello bucky,

Assuming you can get around the ST FAIL message in your other post, yes. You would need to change the PILOT TYPE setting in the S100 from FISHING to SAIL (or POWER, though it doesn't sound like that would suit your boat.) This is described in the S100's handbook.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication