Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Custom Logo or Picture?
03-04-17, 06:48 PM
Post: #1
Custom Logo or Picture?
Is there a way to upload a custom logo or picture to the ES128? I would love to upload my Boat Name to the MFD.
Find all posts by this user
Quote this message in a reply
03-06-17, 04:29 PM
Post: #2
RE: Custom Logo or Picture?
Welcome to the Raymarine Forum msbrett,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
03-07-17, 07:15 PM (This post was last modified: 03-08-17 10:18 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Custom Logo or Picture?
I looked at the referenced FAQ. It states that the instructions pertain to a, c, e, and gS Series MFDs. Will it work on the eS series as well?
Thanks
Find all posts by this user
Quote this message in a reply
03-07-17, 11:56 PM
Post: #4
Wink RE: Custom Logo or Picture?
Sweet! Thanks Chuck!
Find all posts by this user
Quote this message in a reply
03-08-17, 10:23 AM
Post: #5
RE: Custom Logo or Picture?
Mustang,

Q. I looked at the referenced FAQ. It states that the instructions pertain to a, c, e, and gS Series MFDs. Will it work on the eS series as well?
A. Yes. For eS-Series MFDs, the files will be named similarly: OEM_eS95_splash.png and OEM_eS125_splash.png
Find all posts by this user
Quote this message in a reply
03-08-17, 01:07 PM (This post was last modified: 03-08-17 01:10 PM by Chuck - Raymarine - Moderator.)
Post: #6
RE: Custom Logo or Picture?
Excellant! Thanks, Chuck
Find all posts by this user
Quote this message in a reply
03-19-17, 05:53 PM (This post was last modified: 03-20-17 10:15 AM by Chuck - Raymarine - Moderator.)
Post: #7
RE: Custom Logo or Picture?
I followed the directions in the FAQ to the letter but was unsuccessful in changing the splash screen on my eS78. After inserting the micro SD and powering on, the MFD starts as usual. It never does prompt to remove the card. The card has been reformatted (FAT32) and files copied on it again with still no luck. What am I doing wrong?
Find all posts by this user
Quote this message in a reply
03-20-17, 10:21 AM
Post: #8
RE: Custom Logo or Picture?
Welcome to the Raymarine Forum Shesby,

Should you examine the file size of the splash screen file shown within your screen snapshot of the microSD memory card's contents, you will find that it is 1.15MB rather than 688kB (840 x 480) which is specified for a/e/eS-Series MFDs having 7" screens. Your splash screen file should be re-sized accordingly.
Find all posts by this user
Quote this message in a reply
03-20-17, 11:00 AM (This post was last modified: 03-21-17 08:12 AM by Chuck - Raymarine - Moderator.)
Post: #9
RE: Custom Logo or Picture?
Hmm, thought I had resized it. Will check again and update. Thanks, Chuck.
Find all posts by this user
Quote this message in a reply
03-20-17, 06:45 PM (This post was last modified: 03-21-17 08:11 AM by Chuck - Raymarine - Moderator.)
Post: #10
RE: Custom Logo or Picture?
Ahh, found the problem. Although I had changed the size to 840 x 480, I did not notice that it was a 24 bit photo. I changed it to 8 bits and now the overall size is only 184 KB. Interestingly, the resolution changed from 72dpi on the larger file to 96dpi on the smaller.
Thanks for including the file size requirement in your reply. That is what tipped me off to the solution. Will try it out this weekend.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)