Raymarine forum / Raymarine Forums / Multifunction Displays v / a67 MFD cannot read p319 transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
a67 MFD cannot read p319 transducer
08-08-17, 10:04 PM
Post: #1
wimpel Offline
Junior Member
**
 		Posts: 1
Joined: May 2016
Reputation: 0
a67 MFD cannot read p319 transducer
My a67 does not show any transducer in Set Up. When connected it shows depth and fish chart for about 2 to 3 minutes then dies. Red wire steady at 9 V DC. Blue wire wildly fluctuating Voltage readings 0+ to 20+. when working - 0.0 on death. Unit has been returned last year and checked with an overboard transducer. Can I force it to read the transducer so I can adjust the settings ? Thanks.
Find all posts by this user
Quote this message in a reply
08-18-17, 03:50 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: a67 MFD cannot read p319 transducer
Welcome to the Raymarine Forum wimpel,

On which cable's leads were you observing the specified voltages?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication