Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hummingbird 1199 CI/SI Display
05-15-16, 07:34 AM
Post: #1
Hummingbird 1199 CI/SI Display
Hello, I'm wondering about tying in my Hummingbird display into my EV-100 Autopilot with a p70r control ? I searched for Hummingbird but nothing came up? Is there a adapter cable to do this if so would someone know the part number and or process ?
Thank you Ray
Find all posts by this user
Quote this message in a reply
05-16-16, 11:42 AM
Post: #2
RE: Hummingbird 1199 CI/SI Display
What interfaces are available with the Hummingbird unit? NMEA 2000 or NMEA 0183?
Find all posts by this user
Quote this message in a reply
05-16-16, 03:03 PM
Post: #3
RE: Hummingbird 1199 CI/SI Display
Steve, I thought it best to look it up to be sure. It support both, here's what I copied from specs. This unit is furnished with a high speed processor, superior to the previous 1100 series units. It offers ethernet, NMEA 0183 and NMEA 2000 connectivity options.
Thanks Ray
Find all posts by this user
Quote this message in a reply
05-16-16, 03:31 PM
Post: #4
RE: Hummingbird 1199 CI/SI Display
OK, if it does have a NMEA 2000 interface, you can connect it directly to the Seatalk NG backbone established by the Evolution cabling kit that comes with the Evolution autopilot using the DeviceNet to Seatalk NG adapter cable, you would just choose the cable depending on the Male or Female nature of the NMEA 2000 connector of the Hummingbird display.

http://www.raymarine.com/view/?id=5536 - under the Adapter Cable Tab.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)