Raymarine forum / Raymarine Forums / Product Selection Assistance v / Getting routes from PC to G120/GPM400?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Getting routes from PC to G120/GPM400?
05-31-17, 10:55 AM (This post was last modified: 06-23-17 03:42 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Getting routes from PC to G120/GPM400?
Welcome to the Raymarine Forum Josh,

The only means of waypoint/route transfer supported by the GPM400 include the following:
- via a CF memory card which has been populated with an Archive.fsh file (retired Raymarine proprietary waypoint/route/track format) in its root level directory
- via the GPM400's NMEA 0183 communications interface.

The GPM400 does not support transfer of waypoint/route/track data via its SeaTalkng / NMEA 2000 communications interface.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Getting routes from PC to G120/GPM400? - Chuck - Raymarine - Moderator - 05-31-17 10:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication