European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
Adding EV 200 Autopilot
|
|
03-30-16, 02:52 PM
(This post was last modified: 03-30-16 02:54 PM by Steve - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
|
RE: Adding EV 200 Autopilot
Little different with the Raystar 125 GPS, because you will need Seatalk 1 communication, and when using the E120 with the Seatalk 2 port you should move all Seatalk 1 to Seatalk NG. So to connect the RS125 GPS, you will need to add a Seatalk to Seatalk NG converter, then connect the RS125 GPS to the yellow port on the converter then connect the converter to the estiblished Seatalk NG backbone.
The standard Smart Stick should be wired like this Smart Stick- Rudder Port Red- Red Black- Green White- Blue Bare- Gray They didn't connect the RED in order to guard against back feeding power to the GyroPlus Heading Sensor. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Adding EV 200 Autopilot - tjmac71 - 03-29-16, 08:44 AM
RE: Adding EV 200 Autopilot - Steve - Raymarine - Moderator - 03-29-16, 01:33 PM
RE: Adding EV 200 Autopilot - tjmac71 - 03-30-16, 01:15 PM
RE: Adding EV 200 Autopilot - Steve - Raymarine - Moderator - 03-30-16 02:52 PM
RE: Adding EV 200 Autopilot - tjmac71 - 04-12-16, 07:47 PM
RE: Adding EV 200 Autopilot - Steve - Raymarine - Moderator - 04-13-16, 09:40 AM
RE: Adding EV 200 Autopilot - tjmac71 - 04-13-16, 03:20 PM
RE: Adding EV 200 Autopilot - Steve - Raymarine - Moderator - 04-14-16, 08:43 AM
RE: Adding EV 200 Autopilot - tjmac71 - 04-26-16, 10:01 PM
RE: Adding EV 200 Autopilot - Chuck - Raymarine - Moderator - 04-27-16, 03:28 PM
|
User(s) browsing this thread: 1 Guest(s)