The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / SeaTalk and SeaTalkng/NMEA 2000 processing limited to Data Master MFD

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SeaTalk and SeaTalkng/NMEA 2000 processing limited to Data Master MFD
06-22-17, 10:00 AM
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
SeaTalk and SeaTalkng/NMEA 2000 processing limited to Data Master MFD
SeaTalk and SeaTalkng/NMEA 2000 processing limited to Data Master MFD

Unlike NMEA 0183 communications (if supported by the MFD), SeaTalk and SeaTalkng/NMEA 2000 processing is limited to the system's Data Master MFD. Only one MFD within system of compatible MFDs which have been interfaced to on another via Ethernet communications may be configured as the system's Data Master MFD. Accordingly, should the system feature a SeaTalk bus or SeaTalkng / NMEA 2000 backbone, then the SeaTalk bus or SeaTalkng / NMEA 2000 backbone must be interfaced to the system's Data Master MFD.

Note: For redundancy purposes, it is permissible to interface more than one MFD to the SeaTalk bus or SeaTalkng / NMEA 2000 backbone to then permit an alternate MFD to be designated as the system's Data Master MFD.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
SeaTalk and SeaTalkng/NMEA 2000 processing limited to Data Master MFD - Chuck - Raymarine - Moderator - 06-22-17 10:00 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication