Upgrade from E-80 to Axiom- what will transfer?

[Chuck - Raymarine - Moderator]

Gary,

Please click here to view a FAQ addressing this subject. An Axiom RV MFD with RealVision Transducer (s) would need to be installed onboard the vessel. As the Axiom MFDs are not compatible with the DSM30, DSM300, and CP300, should your system presently feature a 1kW (ex. your TM260) or 2kW transducer, then it would be recommended that the DSM300 be replaced with a CP370 sounder module. Alternatively, the transducer may be disconnected from the DSM300 and connected to an appropriate Axiom Y-Cable to support continued use of the currently installed 50kHz/200kHz transducer. Please note that Axiom MFDs will only output 600W, irrespective of whether they have been interfaced to a 600W, 1kW, or 2kW transducer ... hence the recommendation to replace the DSM300 with a CP370 should the currently installed transducer be a 1kW or 2kW transducer.