The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / E80 MFD compatibility with SmartPilot S1 and ST6001

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E80 MFD compatibility with SmartPilot S1 and ST6001
07-21-17, 08:01 AM
Post: #1
Don Guy Offline
Junior Member
**
 		Posts: 7
Joined: Jun 2017
Reputation: 0
E80 MFD compatibility with SmartPilot S1 and ST6001
I've got a SmartPilot S1 and ST6001 on SeaTalk with an E80 MFD. The MFD is getting Heading data from the pilot, but the MFD status box shows a coloured pilot wheel and an "X", and the pilot control menu item is not present on the E80. The pilot is operating normally. I am wondering if there is a compatibility problem between the pilot and MFD, or if a software update is needed on the pilot.

Is the E80 MFD with software App v5.69 and Boot code v1.03 compatible with a SmartPilot S1 course computer software v S1 463 and Controller ST6001 with software v15?

Thank you,
Don
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E80 MFD compatibility with SmartPilot S1 and ST6001 - Don Guy - 07-21-17 08:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication