Raymarine forum / Raymarine Forums / Autopilots v / E80 MFD compatibility with SmartPilot S1 and ST6001

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E80 MFD compatibility with SmartPilot S1 and ST6001
07-25-17, 08:31 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: E80 MFD compatibility with SmartPilot S1 and ST6001
Welcome to the Raymarine Forum Don,

Please click here to view a FAQ addressing this subject. Within E-Series Classic MFDs operating with v5.69 software, the command sequence MENU->SYSTEM SETUP->SYSTEM INTEGRATION->AUTOPILOT CONTROL is used to configure the Autopilot Control feature's state. The S1/S1G/S2/S2G/S3/S3G Autopilot Course Computers will support the MFD's Autopilot Control feature when items within the referenced FAQ have been satisfied.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: E80 MFD compatibility with SmartPilot S1 and ST6001 - Chuck - Raymarine - Moderator - 07-25-17 08:31 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication