Axiom / LH 3.1 feedback / questions

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Steve,

I have verified that I was not only able to create a route by
- graphically by either touching a location or waypoint on the displayed chart, and by
- selecting waypoints from the MFD's waypoint list.

From the My Data dialog, selecting ROUTES->NEW ROUTE->Enter Desired Route Name->SAVE; ADD WAYPOINT->ALL WAYPOINTS->Select Waypoint within the displayed waypoint list->ADD WAYPOINT TO ROUTE. After all desired waypoints have been added to the route, then simply exit the Select Waypoint to Add to Route dialog to save the route.