Raymarine forum / Raymarine Forums / Multifunction Displays v / Axiom v3.2.86 reboots

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom v3.2.86 reboots
09-19-17, 09:53 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axiom v3.2.86 reboots
Welcome to the Raymarine Forum qbayle,

It is quite possible that the observed behavior may occur. The non-Data Master MFDs are very much dependent upon communications with the Data Master MFD. Should one not be shutting the equipment down by switching OFF the breaker / circuit switch supplying power to the MFDs, then it would be recommended that the non-Data Master MFDs be switched OFF prior to switching OFF the Data Master MFD. I favor using the breaker / circuit switch to control the power state of the MFDs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Axiom v3.2.86 reboots - qbayle - 09-19-17, 09:03 AM
RE: Axiom v3.2.86 reboots - Chuck - Raymarine - Moderator - 09-19-17 09:53 AM
RE: Axiom v3.2.86 reboots - qbayle - 09-19-17, 10:05 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication