The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / C-Series Classic MFD's backlight flashing

Thread Closed 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C-Series Classic MFD's backlight flashing
01-25-16, 09:48 AM (This post was last modified: 01-12-17 10:47 AM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
C-Series Classic MFD's backlight flashing
C-Series Classic MFD's backlight flashing

It is recommended that the C-Series Classic MFD's (C70, C80, C120) power cable be unplugged and that the loaded system voltage be measured at its plug to ensure that it is within the operating range of the MFD (10.7-32.0 VDC). If so, then the MFD would be deemed to have suffered an internal failure necessitating that it be serviced by Raymarine's Product Repair Center.

RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
C-Series Classic MFD's backlight flashing - Chuck - Raymarine - Moderator - 01-25-16 09:48 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication