Adding EV 200 Autopilot

[tjmac71]

Steve,

I followed the line that was spliced into the Seatalk/alarm out on the back of the E120 and it connects to a seatalk converter that was previously installed. The GPS is actually a RS 130 GPS.

Can I leave that hooked up to the E120 and just add the new autopilot and backbone to the Seatalk 2 port on the back of the E120? Do I have to direct the MFD system to look for anything or does it notice all the systems automatically? Will it be OK if its getting the GPS information in one port and the EV1 thru another? I hope this makes sense.

Thanks,
TJ