Adding EV 200 Autopilot

[tjmac71]

Thanks again but unfortunately I now have a few more questions.

Can I plug the Seatalk NG converter into the blue port on the backbone that came with the EVO 200 autopilot? That is the only port I have open on that back bone which is next to the E120.

The previous owner striped the wires from NG converter and spliced them into the cable that connected to the Seatalk/Alarm port. The white wire coming from the Seatalk/STNG J-box is the wire I am having the question with that runs to the helm. See pictures from prior installation attached.

Do I still need to unplug the yellow cord and do I need to worry about back-feed on the power?

Can/do I need to use the (A06043) cord and connect all the colored wires? Worried about the power from the NG converter.


I probably should have just hired a professional!!

Thanks Again.