[CA] Replacement System
|
02-06-18, 12:40 AM
(This post was last modified: 02-08-18 02:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA] Replacement System
Hi Chuck
I have a question about the replacement of an ST8002 Head Unit, S2 Computer and Type 1 Pump autopilot system with a P70r, ACU200 & EV1 re-utilizing the Type 1 pump. The owner is unhappy with the performance of the old system with multiple attempts at commissioning and autopilot compass relocation & calibration. This over 1-1.5 years of ownership. He has asked me to replace it with a new system. The question I had is the suitability of an ACU200 used with a Hynautic servo cylinder power steering system. I just wanted to make sure the ACU can handle this type of system before proceeding. I can't imagine why it wouldn't but just wanted to double check with you in case there is any known issues. The last question I had is that the Type 1 pump is installed almost at the helm itself rather than close to the rudder cylinder. I know that Raymarine guidelines are to mount close to the cylinders as possible but was interested to know if that placement is still acceptable. As always, thanks for you help. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA] Replacement System - PetrelMarine - 02-06-18 12:40 AM
RE: [CA] Replacement System - Chuck - Raymarine - Moderator - 02-08-18, 03:28 PM
RE: [CA] Replacement System - PetrelMarine - 02-08-18, 09:11 PM
RE: [CA] Replacement System - Chuck - Raymarine - Moderator - 02-09-18, 08:35 AM
|
User(s) browsing this thread: 1 Guest(s)