Raymarine forum / Raymarine Forums / Product Selection Assistance v / C127 w/ CP370 or 470

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C127 w/ CP370 or 470
04-18-16, 09:58 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: C127 w/ CP370 or 470
Welcome to the Raymarine Technical Forum MAK1377,

The imaging produced by the internal ClearPulse sounder circuitry of an ax7/cx7/e7D/ex7/eSx7 MFD and a CP370 would be virtually identical. A CP370 would not typically be recommended unless operating in water deeper than you have specified. If seeking better imaging, you may want to consider installing a CP370 compatible 1kW High/UltraHigh Performance Transducer and with an E66066 transducer adapter to mate it to the c127 MFD's transducer socket. Alternatively, a CP470 w/compatible high frequency CHIRP transducer may provide better imaging within the depths specified. You may also want to consider installation of a CP100 w/compatible transducer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
C127 w/ CP370 or 470 - MAK1377 - 04-15-16, 01:43 PM
RE: C127 w/ CP370 or 470 - Chuck - Raymarine - Moderator - 04-18-16 09:58 AM
RE: C127 w/ CP370 or 470 - MAK1377 - 04-24-16, 09:08 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication