(DG) e7 card reader problem

[Derek - Raymarine - Moderator]

Hi mraphael

Thank you for your enquiry.

You could try the unit reset,
* Turn the unit off
* Press and hold the Back Button
* Keeping the Back Button pressed in turn the unit on
* After the Splash screen you should see a Dark screen, Press the WPT Button (Waypoint) which is the option for Factory Reset
* After confirmation that FLOB has been dumped, Press Exit and then restart the unit

**Please make sure you backup all Waypoints and Routes and Data settings (My Data menu on home page) etc to a separate MicroSD
other than your Cartography Card**

If this does not cure the issue the unit will need to be sent to Raymarine’s Product Repair Center to be bench checked / serviced.

regards