Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Battery Voltage on Data Bar

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Battery Voltage on Data Bar
03-21-18, 11:55 AM
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Battery Voltage on Data Bar
Tom,

Q1. So bottom line, a eS127 MFD with LH3 will not be able to communicate with my c97 with LH II. So both units must have LH II.
A1. Correct.

Q2. Can a upgrade ticket be created so Raymarine can put the supply voltage in LH II?
A2. Please be aware that after nineteen plus software releases for LightHouse II, no further updates are planned for LightHouse II. All MFD software development will be targeted to LightHouse 3 and MFD software which may replace LightHouse 3.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Battery Voltage on Data Bar - Chuck - Raymarine - Moderator - 03-21-18 11:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication